GR4 products provided by GNEE
Gr4 Ti6AL4V ELI Medical Titanium Wire
Gr4 Titanium Foil For Industrial
GNEE is a leading titanium alloy material manufacturer, providing high-quality products to customers worldwide. With over two decades of experience, we specialize in producing strong, lightweight, and corrosion-resistant Grade 4 titanium rods. Our titanium rods are widely used in aerospace, medical devices, automotive, and sporting goods applications.
We offer Grade 4 titanium rods in various sizes and shapes, including round, square, flat, and hexagonal rods. Our round rod diameters range from 6 mm to 300 mm, and lengths can be customized to meet your specific requirements. Our square rod sizes range from 8 mm to 100 mm, offering the same flexibility for customization. In addition to these standard shapes, we can also provide other shapes, such as rectangular, oval, and octagonal.
|
Gr 4 CP Titanium Bar |
|
|
ASTM B348,ASTMF67,ATSTMF136, |
|
|
Grade 4 |
|
|
6mm~350mm |
|
|
ISO9001:2008,SGS,The third test report |
|
|
Industrial, Medical, Salt-making,Petrochemical, Metallurgy, Electronics , Chemical |
|
N |
C |
H |
O |
V |
|||||||
|
Gr 4 |
0.05 |
0.08 |
0.015 |
0.50 |
0.40 |
/ |
/ |
/ |
/ |
/ |
|
Grade 4 |
|||||
|
80 |
580 |
70 |
485 |
15 |
|
Density: 0.163 lbs/in3 (4.51 g/cm3)
70 - 212 ℃ F (20 - 100 ℃ C) 4.78 x 10·6 (8.6)
Thermal Conductivity: BTU-in/h-ft-℃ F (W/m-℃ K): At 70 ℃ F (21 ℃): 119 (17.2)
Modulus of Elasticity, ksi (MPa) 15.2 x 103 (105 x 103) in tension
Melting Point: 3020 ℃ F (1660 ℃)
Applications of Grade 4 Titanium Bar
1. Aerospace: Grade 4 titanium is often used in the aerospace industry due to its high strength-to-weight ratio and excellent corrosion resistance. It is used in aircraft engines, structural components, landing gear, and other critical parts.
2. Medical Equipment: Titanium is a biocompatible material that does not react with the human body. Grade 4 titanium is often used to manufacture medical implants such as pacemaker cases, knee and hip replacements, and dental implants.
3. Automotive: Titanium bars are used in the automotive industry for lightweight and high-strength components, such as exhaust systems and suspension components.
4. Sporting Goods: Grade 4 titanium bars are popular in the sporting goods industry due to their durability and lightness. They are used to manufacture bicycle frames, golf clubs, and other sports equipment.
|
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928
|
|
|
Gr1, Gr2, Gr4, Gr7, Gr9, Gr11, Gr12, etc
|
|
|
<=15000mm
|
|
|
Diameter 3-114mm
|
|
|
|
a) Outer Diameter: +/- 0.01mm
|
|
b) Thickness: +/- 0.01mm
|
|
|
c) Length: +/- 0.1mm
|
|
|
Pickling, annealing, polishing, bright.
|
|
|
1.Low Density and High Strength
2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic 6.Good thermal properties 7.Low Modulus of Elasticity |
|
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
|
|
|
ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4928 etc
|
|
|
|
|
|
1-300mm,customizable
|
|
|
50mm-6000mm,customizable
|
|
|
h6~h13 H10~H13
|
|
|
According to. EN 10204.3.1
|
|
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc.
|
|
|
ASTM B265 JIS H4600 GB/T 3620.1 |
|
|
ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11JIS Pur Ti: Class 1 Class 2 Class 3 Class 4;Ti Alloy: Class 60 |
|
|
thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm |
|
|
|
|
|
1)Further making utensil. |
| GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 etc. ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-11, ERTi-12 |
|
|
Dia:0.1-8mm or customizable |
|
|
ASTM B348,ASME SB348,ASTM B863,AWS.A5.16,GB/T3623-2007 |
|
|
10kg |
|
